Not for
Reproduction
20
800X Series Zero-Turn Rider - 61” & 72” Mower Deck
ferrismowers.com | snapperpro.com
Figure 40. Top Speed Adjustment
A. Top Speed Adjustment Bolt
B. Handle Placement Hardware
C. Alignment Hardware
D. Ground Speed Control Lever Mount Bolts
E. Control
Lever
Base
A
A
B
C
D
E
WARNING
Do NOT adjust the tractor for a faster overall speed
forward or reverse than it was designed for.
Ground Speed Control Lever
Adjustment
The ground speed control levers can be adjusted in three
ways. The alignment of the control levers, the placement of
the levers (how close the ends are to one another) and the
height of the levers can be adjusted.
To Adjust the Handle Alignment
Loosen the ground speed control lever mount bolts (
D,
Figure 40
) and pivot the lever(s) (
C
) to align with each other.
To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt (
B
) in or
out to properly adjust the lever end spacing.
To Adjust the Handle Height
Remove the mounting hardware (
D
) and reposition the
handle either up or down from its original position. You will
need to readjust the handle alignment as described above.
Speed Balancing Adjustment
If the rider veers to the right or left when the ground speed
control levers are in the maximum forward position, the top
speed of each of these levers can be balanced by adjusting
the top speed adjustment bolt(s) (
A, Figure 40
). Only adjust
the speed of the wheel that is traveling faster.
To Reduce the Speed of the Faster Wheel
1. Loosen the securing nut.
2. Turn the top speed adjustment bolt COUNTER-
CLOCKWISE to reduce the speed.
3. Retighten the securing nut when adjustment is complete.
