Not
for
Reproduction
31
en
ENGINE *
Briggs & Stratton
Model
Intek
TM
Series
Displacement
44.18 cu in. (724 cc)
Model
Professional Series
TM
Displacement
44.18 cu in. (724 cc)
All Engines
Oil Capacity
64 oz (1,9 L)
Spark Plug Gap
0.030 in. (0,76 mm)
Spark Plug Torque
180 in-lbs (20 Nm)
CHASSIS
Fuel Tank Capacity
3 gal (11,4 L)
Front Wheels
Inflation Pressure: 22 psi (1,52 bar)
Rear Wheels
Inflation Pressure: 12 psi (0,83 bar)
TRANSMISSION
Type
Hydro-Gear
®
EZT
®
Type
Hydro-Gear
®
ZT-2800
®
MOWER
Width of Cut
42” (107 cm)
44” (112 cm)
46” (117 cm)
48” (122 cm)
52” (132 cm)
Cutting Height
1.5” - 4.5” (3,8 - 11,7 cm)
Specifications
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995.
Torque values are derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM for all others;
horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.
COM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected
without these attachments. Actual gross engine power will be higher than net engine power and is affected by, among
other things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on which
engines are placed, the gasoline engine may not develop the rated gross power when used in a given piece of power
equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components
(air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs &
Stratton may substitute an engine of higher rated power for this engine.
Power Rating *
Parts and Accessories
See an Authorized Service Dealer.
* NOTE: The engine information contained in this manual applies to Briggs & Stratton engines only. For information regard
-
ing non-Briggs engines, refer to the engine manual supplied with your unit.
