Not
for
Reproduction
30
PROBLEM
LOOK FOR
REMEDY
Mower will not raise.
Mower deck not properly
installed.
See
Mower Deck Installation
.
Mower cut is uneven.
Mower not leveled properly. See
Mower Adjustment
.
Rider tires not inflated
equally or properly.
See
Maintenance
section.
Mower cut is rough
looking.
Engine speed too slow.
See engine speed control to FAST.
Ground speed too fast.
Decrease ground speed.
Engine stalls easily with
mower engaged.
Engine speed too slow.
Set engine speed control to FAST.
Ground speed too fast.
Decrease ground speed.
Cutting height set too low.
Cut tall grass at maximum cutting.height during first pass.
Discharge chute jamming
with cut grass.
Cut grass with discharge pointing toward previously cut area.
Excessive mower
vibration.
Blade mounting hardware is
loose.
Tighten to 50-60 ft-lbs (68-81 Nm).
Troubleshooting the Mower
For all other issues, see authorized dealer.
