background image

Not 

for 

Reproduction

7

GENERAL OPERATION

 1.  Read, understand, and follow all instructions in the man-

ual and on the unit before starting.

 2.  Do not put hands or feet near rotating parts or under 

the machine.  Keep clear of the discharge opening at all 

times.

 3.  Only allow responsible adults, who are familiar with the 

instructions, to operate the unit (local regulations can 

restrict operator age).

 4.  Clear the area of objects such as rocks, toys, wire, etc., 

which could be picked up and thrown by the blade(s).

 5.  Be sure the area is clear of other people before mowing. 

Stop the unit if anyone enters the area.

 6.  Never carry passengers.

 7.  Do not mow in reverse unless absolutely necessary. Al-

ways look down and behind before and while travelling 

in reverse.

 8.  Never direct discharge material toward anyone.  Avoid 

discharging material against a wall or obstruction.  Ma-

terial may ricochet back toward the operator.  Stop the 

blade(s) when crossing gravel surfaces.

 9.  Do not operate the machine without the entire grass 

catcher, discharge guard (deflector), or other safety de

-

vices in place.

 10. Slow down before turning.

 11. Never leave a running unit unattended. Always disen-

gage the PTO, set parking brake, stop engine, and re-

move keys before dismounting.

 12. Disengage blades (PTO) when not mowing.  Shut off en

-

gine and wait for all parts to come to a complete stop be-

fore cleaning the machine, removing the grass catcher, 

or unclogging the discharge guard.

 13. Operate the machine only in daylight or good artificial 

light.

 14. Do not operate the unit while under the influence of alco

-

hol or drugs.

 15  Watch for traffic when operating near or crossing road

-

ways.

 16. Use extra care when loading or unloading the unit into a 

trailer or truck.

 17. Always wear eye protection when operating this unit.

 18. Data indicates that operators, age 60 years and above, 

are involved in a large percentage of power equipment-

related injuries.  These operators should evaluate their 

ability to operate the equipment safely enough to protect 

themselves and others from injury.

 19. Follow the manufacturer’s recommendations for wheel 

weights or counterweights.

 20. Keep in mind the operator is responsible for accidents 

occurring to other people or property.

 21. All drivers should seek and obtain professional and 

practical instruction.

 22. Always wear substantial footwear and trousers.  Never 

operate when barefoot or wearing sandals.

 23. Before using, always visually check that the blades and 

blade hardware are present, intact, and secure.  Re-

place worn or damaged parts.

 24. Disengage attachments before: refueling, removing an 

attachment, making adjustments (unless the adjustment 

can be made from the operator’s position).

 25. When the machine is parked, stored, or left unattended, 

lower the cutting means unless a positive mechanical 

lock is used.

 26. Before leaving the operator’s position for any reason, 

disengage the PTO, engage the parking brake (if 

equipped), stop the engine, and remove the key.

 27. To reduce fire hazard, keep the unit free of grass, 

leaves, & excess oil.  Do not stop or park over dry 

leaves, grass, or combustible materials.

 28. It is a violation of California Public Resource Code Sec-

tion 4442 to use or operate the engine on or near any 

forest-covered, brush-covered, or grass-covered land 

unless the exhaust system is equipped with a spark ar-

rester meeting any applicable local or state laws.  Other 

states or federal areas may have similar laws.

 

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of  

  unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. 

This mowing  

  deck is capable of amputating hands and feet and throwing objects.

 The triangle in text signifies important  

  cautions or warnings which must be followed.

TRANSPORTING AND STORAGE

 1.  When transporting the unit on an open trailer, make sure 

it is facing forward, in the direction of travel.  If the unit is 

facing backwards, wind lift could damage the unit.  

 2.  Always observe safe refueling and fuel handling prac-

tices when refueling the unit after transportation or stor-

age.

 3.  Never store the unit (with fuel) in an enclosed poorly 

ventilated structure.  Fuel vapors can travel to an ignition 

source (such as a furnace, water heater, etc.) and cause 

an explosion.  Fuel vapor is also toxic to humans and 

animals.

 4.  Always follow the engine manual instructions for stor-

age preparations before storing the unit for both short 

and long term periods.

 5.  Always follow the engine manual instructions for proper 

start-up procedures when returning the unit to service.

 6.  Never store the unit or fuel container inside where there 

is an open flame or pilot light, such as in a water heater. 

Allow unit to cool before storing.

en

Do not load this zero-turn rider on a trailer or truck using two 

separate ramps. Only use a single ramp that is at least one foot 

wider than the width of the rear wheels of this rider. This rider has a 

zero turning radius and the rear wheels could fall off the ramps, or 

the rider could tip over injuring the operator or bystanders.

WARNING

Summary of Contents for 360Z Zero Turn Rider





























































































Reviews: