Snap-On Zeus User Manual Download Page 202

Page: 202 / 235

SureTrack® & Repair Information

Shopkey Pro FAQ’s

195

15.13.2 How do I change the default application?

ShopKey Pro is the default application that opens when the

SureTrack & Repair

Information

icon is selected from the Home screen on your diagnostic tool.

If needed, you can change the default application to ProDemand, by selecting the

menu

icon (

Figure 15-25

), then select

ProDemand

Figure 15-25

15.13.3 I work in a shop that has ShopKey Pro or
Pro Demand, how do I link my diagnostic tool to it?

NOTE

To use this feature and link to a ShopKey Pro or ProDemand account, you
must have an active SureTrack account. To create a SureTrack account, see

Creating an Account

on page 189.

If you wish to access your shops’ ShopKey Pro or ProDemand account from your
diagnostic tool:

Have the shop administrator (or applicable), log into ProDemand or

ShopKey Pro.

Select the username (near the top right), and then from the dropdown menu

select

Profile Manager,

then log in again to the Shop Profile Manager.

The Shop Profile Manager window will open (

Figure 15-26

Figure 15-26

Select

Add a technician

(

Figure 15-26

)

Enter the email address that you used when you created your SureTrack

account for the diagnostic tool.

Close the Shop Profile Manager window to save and exit.

Now, when you select the Repair Information icon from the Home screen on your
diagnostic tool, you will connect to your shops’ ShopKey Pro or ProDemand
account.

Shop Tech 1

Shop Tech 3

Shop Tech 2

Username

+ Add a technician

Summary of Contents for Zeus












































































































































































































































Search results

Summary of Contents for Zeus

Reviews:

Related manuals for Zeus

Brands by name

Popular brands

Snap-On Zeus, User Manual

Search results

Summary of Contents for Zeus

Reviews:

Related manuals for Zeus

Brands by name

Popular brands