Quick Lookups
Tire and Wheel Service
157
NOTES
— Tire and Wheel Service vehicle coverage is the same as the Scanner
vehicle coverage.
— Not all vehicles may have on-board diagnostic tool reset capabilities, or
have information available.
— If you experience a wireless network connection loss, Tire Service
information will not refresh and/or may cause the function to stop. To continue
use, you must re-establish your Internet connection.
— Performance may vary depending on your wireless network equipment and
ISP.
10.3.1 Operation
NOTE
The information and procedures provided by the Tire and Wheel Service
function is vehicle specific, therefore a vehicle must be identified before
information can be displayed.
z
Using the Tire and Wheel Service function
There are two methods to access this function:
•
From the Home screen
- select the
Quick Lookups
icon (
), then
select
Tire and Wheel Service,
then proceed to Step 1 below.
Figure 10-13
•
From within a current Scanner session
- select
Tire and Wheel Service
(or
applicable choice) from the System menu (
), then proceed to Step
3 below.
Figure 10-14
Scanner System Menu
1.
Follow the screen prompts to select the vehicle,
Manufacturer, Year
and
Model.
2.
Select
OK
to confirm the vehicle
.
3.
After the TPMS Reset instruction screen displays, you can navigate to other
options as needed, see
Tire and Wheel Service Toolbar Icons
.
NOTE
Depending on the active function, descriptive information is displayed in the
main body of the screen. If applicable, use the scroll bar to scroll up/down to
view all of the information.
