- 23 -
7: REVIEW MOVIE
“
Review Movie
”
appears on the
“
Main Menu
”
only if a movie has been recorded.
Subsequent movie recording or entering a new vehicle identification overwrites or
erases any previous movie.
The movie can be up to 101 frames long:
•
The number of frames is dependant on the ECU data and/or the custom data
list.
•
Maximum 25 after the trigger unless cut short.
•
The trigger point is frame zero (
0
).
A movie print-out of a screen or a frame of data includes the vehicle identification.
A movie display does not show the vehicle identification.
Scroll the thumbwheel to
“
Review Movie
”
on
“
Main Menu
”
and press
Y
.
The previously recorded movie is displayed in the data viewing mode:
The movie can be reviewed by scrolling as in the data mode. However, these
general rules apply to the
“
Review Movie
”
operation:
1: Always enter the movie from the
“
Main Menu
”
. Frame
“
0
”
, the trigger point is
automatically chosen.
2: Upon entering a
“
Movie
”
, the thumbwheel scrolls lines of data, just as it does
in the data-viewing mode.
3: The
Y
button does not fix or hold a screen or a frame of data.
4: The
Y
button acts as toggle switch to change the scrolling operation of the
thumbwheel as follows:
a:
When entering the movie at frame 0, the thumbwheel scrolls data lines
within that frame. The frame number stays fixed in the upper left corner.
b:
Press
Y
to switch the thumbwheel action to scrolling frames. In this
mode it is possible to scroll forward or back in time.
c:
The frame number will start to flash in the upper left corner.
d:
As the thumbwheel is scrolled, the frame number will change when
moving to another data frame:
OPERATION
0
RPM 1000
O2 (mV) 658
BATT (V) 13.5
* * * * CODES & DATA * * * *
14 COOLANT TEMPERATURE SENSOR
COOLANT (
o
C) -48
COOLANT (V)
5.00