- 19 -
Refer to the
“
Custom Setup
”
section of this manual for instructions about setting
the Scanner for printer communication. Refer to the
“
Remote Printer Setup
”
section
of the Reference Manual for information on setting-up the printer.
All print-outs of a screen or a frame include the vehicle identification.
After connecting the printer and ensuring that communication is set correctly, scroll
the thumbwheel to
“
Print Screen
”
or
“
Print Frame
”
and press
Y
. This starts the
printing operation, and the Scanner displays:
When printing is complete, it automatically returns to the
“
Exit
“
menu. If
N
is
pressed to abort the printing, the Scanner returns to the
“
Exit
”
menu before printing
is complete.
If the printer does not respond or fails during printing, the Scanner displays this
additional message on lines 3 and 4:
If the printer problem is corrected or if the printer recovers, it returns to the normal
printing display. Lines 3 and 4 clear automatically and the printer resumes printing.
ARM MOVIE
Perform the following steps to arm the
Y
button as a trigger to record a movie:
1: From the
“
Main Menu
”
, select
“
Codes & Data
”
and press
Y
.
2: After entering
“
Codes & Data
”
, press N for the
“
Exit
”
menu.
3: Scroll to
“
Arm Movie
”
and press
Y
. The following will be displayed:
4: Pressing
Y
erases any previous movie stored in Scanner memory and arms
the
Y
button to trigger a new movie. The Scanner automatically returns to the
previously selected data mode and
“
Arm
”
appears at the left side of the top
line.
OPERATION
PRINTING.
WAIT.
PRESS N TO ABORT PRINTING.
PRINTING.
WAIT.
PRESS N TO ABORT PRINTING.
PRINTER NOT RESPONDING. CHECK PRINTER.
CHECK PRINTER PAPER.
PRESS Y TO CLEAR MOVIE MEMORY AND ARM
MOVIE TRIGGER. FRAME NUMBERS WILL
APPEAR ON C&D SCREEN AFTER MOVIE IS
TRIGGERED.