200/300 Series
— VTC eLock Instructions
8
200/300 Series
VTC eLock — Manual Programming
continued
6. Press ‘UP” / “DOWN” to scroll by line or
+/-
to scroll by page
to highlight credential to be edited.
7. Press “NEXT/SELECT” to edit highlighted credential
8. Press
+/-
to change
Level
(Supervisor/User); press “UP/
DOWN” to highlight
2nd PIN
. To add a new or change an
existing 2nd PIN, enter a 4 - 14 digit number using the
numeric keypad. Press “ENTER” when done. Confirm the
new/changed PIN by entering it again when prompted. Press
“ENTER” when done.
9. Press “BACK/CANCEL” to return to
CREDENTIAL MENU
.
SET/EDIT YOUR 2nd PIN
Note: There are two status levels; Supervisor and User.
Only
Supervisors
are allowed to
SET/EDIT YOUR 2nd PIN
.
The steps below will make the logged in credential a Dual
Credential Supervisor requiring a 2nd PIN.
Follow the
EDIT CREDENTIAL
steps to add/change dual
credential status for other Supervisors or Users.
1. Press “MENU”
LOGIN PLEASE
will be displayed.
2. Scan valid credential or enter 4-14 digit PIN and Press
“ENTER”
3. Press “DOWN” button to highlight
CREDENTIAL MENU
and
press “NEXT/SELECT”
4. Highlight
SET YOUR 2nd PIN
and press “NEXT/SELECT.” (
EDIT
YOUR 2nd PIN
will appear if a second PIN credential already
exists)
5.
Type new 2nd PIN
will be displayed. Enter new 4 - 14 digit
PIN and press “NEXT/SELECT.”
6.
Type 2nd PIN
again will appear. Enter the 4 - 14 digit PIN
again and press “NEXT/SELECT.”
NEW PIN SET
will appear.
Display Formats
Using
DISPLAY FORMATS
, the following can be adjusted:
HOURS: AM/PM or 24 HOUR
M-F/DATE:
w
MON-SUN; MM/DD/YY;
w
MON-SUN; MMM D ‘YY;
w
MON-SUN; DD-MM-YY;
w
MON-SUN; DD-MMM-YY
w
MON-SUN; YYYY-MM-DD
1. Press “MENU.”
LOGIN PLEASE
will be displayed.
2. Scan valid credential or enter 4-14 digit PIN and press
“ENTER.”
3. Press “DOWN” button to highlight
DISPLAY FORMATS
and
press “NEXT/SELECT.”
4.
DISPLAY FORMATTING
will be displayed.
5. Press “UP”/“DOWN” buttons to select and
+/-
buttons to
adjust.
6. Press “NEXT/SELECT” when done.
Set Date/Time
Using
SET DATE/TIME
, the following can be adjusted:
SETUP TIME ZONE (INCLUDING AUTO DAYLIGHT SAVING)
SET DATE (MONTH, DAY, YEAR)
SET TIME (HOUR, MINUTE, AM/PM)
1. Press “MENU.”
LOGIN PLEASE
will be displayed.
2. Scan valid credential or enter 4-14 digit PIN and press
“ENTER.”
3. Press “DOWN” button to highlight
SET DATE/TIME
and press
“NEXT/SELECT.”
4.
DATE/TIME MENU
will be displayed.
5. Press “UP”/“DOWN” to scroll and “NEXT/SELECT” to modify.
6. Press “UP”/“DOWN” buttons to select and
+/-
buttons to
adjust.
7. Press “NEXT/SELECT” when done.
8. Press “BACK/CANCEL” to return to main menu.
Network Test
(if equipped)
Using
NETWORK TEST
the strength and quality of the eLock
connection to the network is displayed. The IP and MAC
addresses are also shown here.
1. Press “MENU.”
LOGIN PLEASE
will be displayed.
2. Scan valid credential or enter 4-14 digit PIN and press
“ENTER.”
3. Press “DOWN” button to highlight
NETWORK TEST
and press
“NEXT/SELECT.”
4.
NET STATUS
will be displayed as well as
Str: & Qual:
,
IP
address
and
MAC address
.
5. Press “CLEAR” to exit.
LCD Contrast
Using
LCD CONTRAST
, the LCD contrast can be adjusted:
1. Press “MENU.”
LOGIN PLEASE
will be displayed.
2. Scan valid credential or enter 4-14 digit PIN and press
“ENTER.”
3. Press “DOWN” button to highlight
LCD CONTRAST
and press
“NEXT/SELECT.”
