®
EEWH316A Tire Changer Operation Manual
Operation Manual
Page 11
1.2.1 TURNTABLE & CABINET FEATURES
EEWH316A
INTEGRATED BEAD SEATING JETS -
Air inflation jets are
integrated into the turntable clamping jaws to insure full bead
seating force directly into the tire cavity regardless of tire
diameter.
ADJUSTABLE BEAD BREAKER OPENING
- Simple two
position bead breaker pin adjustment allows for readjusting
breaker to fit larger OD tires.
TWIN CYLINDER CLAMPING POWER -
Two 3" clamping
cylinders provide uniform clamping pressure throughout the
stroke (regardless of rim sizes) as well as providing 25% more
clamping power than most single clamping cylinder tire
changers. Additionally these two smaller cylinders reduce
the critical turntable to cabinet distance, reducing the stress
on the transmission.
WHEEL CLAMPS
UNIQUE SIX POINT CONTACT CLAMPS
Provide better gripping capability regardless of dirt and
moisture.
REDUCED ANGLE CLAMPS
Increases clamping contact area with rim insuring no slippage.
NYLON INSERT SOFT TOUCH CLAMPS
Single sided nylon insert in the clamping jaws provides
nonmetal touch in critical customer visible areas.
VALVE CORE/TIRE TOOL STORAGE CABINET
On tire changer storage area for valves, tools, caulk, etc.
INCOMING AIR PRESSURE GAUGE
Ergonomically located air gauge allows easy operator
monitoring of incoming air pressure.
INTEGRATED PRESSURE LIMITER
Integrated safety pressure limiter stops air flow once tire
pressure has reached approximately. 55 PSI preventing
accidental tire over-inflation.
MOUNT/DEMOUNT ARM ASSEMBLY
SURGE TANK IN THE TOWER -
Space-saving design
integrates the air storage surge tank in the tower allowing for
flush to wall tire changer installation.
ADJUSTABLE SLIDEWAY -
Unique adjustable vertical mount/
demount hex shaft slideway allows for easy operator
adjustment to compensate for any cumulative wear in the
slideway causing mount/demount head
movement.
NON-SCRATCH NYLON INSERT -
Integrated into the mount/
demount head is a replaceable scratch resistent nylon insert
protecting against accidental rim contact.
SAFETY RESTRAINT ARM (OPTIONAL)
TIRE/RIM ASSEMBLY RESTRAINT -
Safety Restraint Arm
restrains tire and rim assembly to the tire machine during the
inflation process reducing potential for injury caused by the
unlikely event of catastrophic tire or rim failure.
SIMPLE SWING ARM DESIGN -
SRA arm easily swings to
the left when not in use allowing the technician to quickly and
safely perform the inflation process without disrupting the tire
changing procedure.
GRAVITY LOCK -
SRA lock mechanism operates without any
mechanical cam system eliminating the possibility of system
deterioration or mis-adjustment from mechanical wear.
POSITIONING SAFETY INTERLOCK SWITCH -
Integrated
switch insures that SRA arm is centered on the tire/rim
assembly before the inflation process can begin.
ANTI-ROTATION LOCK
-
Prevents SRA from rotating
horizontally during inflation process.
CONSTRUCTION DESIGNED FOR DURABILITY
RUST PROOF VALVES AND CYLINDERS -
Critical bead
breaking cylinder is lined with rustproof polyfiber liner for years
of rust free operation. Non-lined cylinders will pit causing
bead breaker power loss.
LIFETIME LUBRICATED POLYMER VALVES -
Critical
footvalves fabricated from glass/fiber self-lubricating material
providing years of maintenance free operation.
WATER SEPARATOR AND AUTOMATIC OILER -
Lubricates
all air used for machine operation, does not lubricate air used
for tire inflation, as do some competitive models.
HIGH TORQUE 1HP MOTOR -
(air-electric models)
Industrial strength high torque turntable drive motor eliminates
tire remount stalling on low profile high performance tires (UL/
CSA approved ).
3 YEAR TRANSMISSION WARRANTY -
Designed for
extremely heavy use, the critical motor to turntable
transmission linkage carries a full three (3) year replacement
warranty.
