20
5.14 ARM RESTRAINT ADJUSTMENT
The arm restraint are designed to automatically engage when the lift is raised and
disengage when the lift is fully lowered. The arm restraint can be adjusted by turning the
arm restraint bolt (
Figure 17
).
Figure 17 – Arm Restraint Adjustment
6 LIFT MAINTENANCE GUIDELINES
6.1 SAFETY INSTRUCTIONS
Read operating and safety manuals before using any lift
Do not operate a lift that has been damaged or is in disrepair
Proper inspection and maintenance is necessary for safe operation
6.2 PERIODIC
MAINTENANCE
DAILY:
1.
Check all hydraulic lines and fittings for pinch points, damage , cracks or leaks
2.
Check all electrical wiring for pinch points, cracks or damage
3.
Check all moving parts for uneven or excessive wear
4.
Repair or replace all damaged, defective, worn or broken components
immediately
5.
Check the telescopic arms for movement. Clean any grease or oil from the lifting
adapters
Summary of Contents for EELR326A
