43
It is strongly recommended that the listener make this comparison. When the emulation is heard later
in another room, and the eye sees one environment while the ear hears another, the brain can
sometimes question whether the emulation is really what the measured room sounded like. Having
“certified” the emulation while in the measured room gives the listener the confidence to dismiss this
possible effect. With experience, the listener becomes accustomed to hearing one room while seeing
another and the issue, if it had arisen, disappears.
Tilting the headphones to switch between headphones and speakers.
Step 7:
To enable the tilt detector, press
MENU
, then
SVS
. The screen will say:
> DUAL: N
DELAY: 0.5f ( 0.0)
SCOPE: HOLD
DEMO: OFF
Use the ^ and
v
keys do position the cursor on
DEMO
. Use the < and > keys to choose
OFF
or
TILT
to
turn the detector off or on. Press
OK
to save the setting or
CANCEL
to cancel the setting and return to
the previous status.
It is best to leave the tilt detector off during normal operation. The sensor responds to acceleration and
therefore can switch the bypass on and off if the user’s head is moved too quickly, or if the headphones
are off the head and moved. Therefore the default setting is
OFF
.
The tilt setting applies only to the preset currently selected.
Step 8:
With the tilt detector on, remove the headphones from your head and tilt them forward in your
lap. The headphones should shut off and the speakers should turn on. Replace the headphones onto
your head; the speakers should turn off and the headphones should turn on.
