smv MULTI-LIFT SYSTEM, Instruction Manual

Page: 44 / 53

44
AUTOLEVEL SYSTEM
SETUP AND PROGRAMMING PROCEDURE
(FOR INSTALLER ONLY)
Led
Ceci signifie : Voyant allumé
****FOLLOW THIS PROCEDURE STEP BY STEP TO ENTER THE PROGRAMMING MODE****
SETTING UP THE POSITION OF CENTER BUBBLE LEVEL
It must first memorize the Zero level and for this it is necessary that the vehicle will be level in manual mode with the
remote control. Use the remote control to find the horizontal position by checking with a "spirit level".
To save the zero level: the switch on-off of the small interior panel must be OFF.
Press PROG button and hold for 2 seconds and at the same time, turn the main switch on the control panel to
ON. After 3 seconds, a beep sounds. The buzzer will continue to sound and a first GREEN LED lights in the middle by
default and some bright lights flash. When the GREEN LED lights in the center FIXED ZERO level is stored.
You must turn the switch to OFF.