smv MULTI-LIFT SYSTEM, Instruction Manual

Page: 23 / 53

23
It is often necessary to personalise the type of anchoring brackets used on the chassis because of different vehicle
disposition.
Brackets must always be anchored to the supporting chassis in a structural way.
In the event of difficulty or doubt in deciding on the correct position for brackets please consult our technical
department.
Once the anchorage points have been identified, the space occupied by the jack in its horizontal position when the
vehicle is in in motion must be considered.
Always follow manufacturer instructions when boring holes or carrying out welding on the chassis for anchoring
the various brackets.
DIAGRAM OF ESCAPE PATHS
The fixed vertical system jacks
must be assembled so as not to go
beyond the ideal lines of the escape
paths of the vehicle.