Smooth Fitness EVO 3CD, Owner'S Manual, Page: 41 / 44

-41-
troubleshooting
Treadmill will not start:
1. Make sure the power cord is
plugged into a surge protector, the
surge protector is plugged into a
properly grounded outlet and the
surge protector is turned on (refer
to the Power Requirements section
in this manual).
2. Check the circuit breaker reset
switch located on the front of the
treadmill. Turn the power off, wait
5 minutes then press the rest switch.
3. Check the house electrical
breaker box and the circuit breaker
for the room the treadmill is located
in. If it has tripped, reset or have an
electrician replace the breaker in
home.
4. Have an electrician check for
inadequate voltage at the outlet.
Troubleshooting:
NOTE : Do not touch any internal
electric wires without consulting the
manufacturer.
No display on the Computer LED,
after the power is switched on:
1. Make sure the power cord has
been plugged in properly to the power
switch on the base frame and mains
power socket.
2. Make sure the safety key is
inserted properly into the safety key
slot on the console. Try pulling it in
and out several times until the LED
lights up.
Computer LED lights up but the
running belt has no movement:
1. Follow the console operating
instructions for the QUICK START
manual program then press the Start
button to see if the belt will move.
The belt should move at 0.5 miles
per hour.
2. If the belt still does not move, press
the Speed Up button and see if the
speed LED window indicates the
speed increasing.
3. If when you press the speed button
the speed LED window indicates the
speed increasing, but the belt still
does not move please call Customer
service at 1.888.800.1167.
Treadmill looses power during
use:
1. Check the circuit breaker reset
switch located on the front of the
treadmill. Turn the power off, wait
5 minutes then press the rest switch.
If the treadmill still will not operate,
please call Customer service at
1.888.800.1167.
2. Check the house electrical
breaker box and the circuit breaker
for the room the treadmill is located
in. If it has tripped, reset or have an
electrician replace the breaker in
home.
Treadmill walking belt slows
during use:
1. Check to make sure the treadmill
is securely plugged into an UL-listed
surge protector, rated at 15 amps,
with a 14-guage cord of five feet or
less and the surge protector is
securely plugged into the outlet. If
the treadmill still will not operate,
please call Customer service at
1.888.800.1167.
Treadmill walking belt slips or is
not centered on rear roller:
Refer to the Belt Adjustment section
of this manual. If you require
additional assistance please call
Customer service at 1.888.800.1167.
TR
OUBLESHOO
TING