Smooth Fitness 52551, Owner'S Manual

Page: 11 / 32

assembly instructions
-11-
Step 2 :
Cap the Top Frame (7) with two 2” x 3”
Rect End Caps (58). Insert two 3/4”
Bushings (67) into the sleeve on the Top
Frame (7). Attach the Lat Bar Holder (8)
to the Top Frame (7) using two 3/8” x 3”
Hex Head Bolts (83), four 3/8” Washers
(96) and two 3/8” Nylon Nuts (100).
Thread two Adj Stoppers (66) into the
Top Frame (7)
Attach the Pec Deck Back Pad (42) to
the Pec Dec Upright (5) using two 3/8”
x 3-1/2”Hex Head Bolts (82) and two
3/8” Washers (96). thread one Adj
Stopper (66) into the Pec Deck Upright
(5).
Slide the Back Pad Hinges (15) onto the
Adj Back Bracket (14). Attach the Back
Pad (43) to the Back Pad Hinges (14)
using two 3/8” x 3/4” Hex Head Bolts
(88) and two 3/8” Washers (96). Attach
the Adj Back Bracket (14) to the Press
Upright (4) using one 3/8” x 3” Hex Head
Bolt (83), two 3/8” Washers (96) and one
3/8” Nylon Nut (100). Insert the Bolster
(33) into the sleeve on the Adj Back
Brakcet (14) then tighten with the 5/16”
x 8” Set Screw (93). Slide two 4” Foam
Pads (48) onto the Bolster (33) then cap
with a 1” Round End Plug (61) at each
end. If the Foam Pads (48) are dificult
to slide onto the Bolster (33) try applying
a small amount of soapy water to the
Bolster (33) prior to sliding on the pads.
ASSEMBL
Y