18
STEP 26:
Attach (4) ignition wires to each
burner electrode (Fig. A).
Tilt burner tubes slightly and
insert through openings in front
wall of cabinet. Make certain that
the tip of each valve is completely
INSIDE the end opening of the
burner tubes (Fig. B).
Fasten burner tubes to the burner
support brackets at the back of
the cabinet (Fig. C).
Fig. A
Fig. B
Fig. C
15
Hardware Needed:
(4) #8-32x5/16” screws
1/4 *15 2 PCS
STEP 25:
Place HVR cover in the front
corner of the gas grill cabinet
where the HVR enters and exits
the cabinet. Make sure top of
cover is positioned under the
rivnut shown here.
Attach with (2) screws.
Rivnut
21
Hardware Needed:
(2) 1/4-20x5/8” Screws
ASSEMBLY,
ENSAMBLAJE
25
26
