HOT LINE
®
Blood and Fluid Warmer
Technical Service Pack
52
S E C T I O N 5
E v e r y 1 2 M o n t h s
Replace O-Ring Seals
■
Remove the socket head screws with an
1
/
8
-inch Allen key.
■
Remove the disposable interface block, being careful of the
microswitch lever.
■
Using a cotton swab, remove the old O-Rings, and clean out
the empty sockets.
GM-0163_8501-GB-A
Figure 5 - 3: Revealed: the O-Rings in their niches
Figure 5 - 2: Getting access to the O-Ring Seals
