1.
Insert a fresh set of four AA batteries or a rechargeable
battery pack
2.
Press and hold the power switch to turn the pump on
3.
Pump displays the home screen
4.
Select Tasks, then View Advanced Tasks, then Start
New Patient
5.
The next screen informs you that completing this task
will overwrite all delivery settings
Note: To edit individual settings rather than starting a new
patient or protocol, see Editing Individual Delivery Settings.
6.
Press continue to unlock the keypad using the security
code or the pump key
7.
Select the therapy -
press
or
to highlight
the desired therapy and
press Select
8.
Select the qualifier -
press
or
to highlight
the desired qualifier and
press Select
9.
Select the drug - press
or
to highlight the desired drug
and press Select
10.
Confirm and review the
settings – press Yes if the
information is correct and
Review to continue
11.
Carefully check the patient
specific parameters. Press
Accept Value on each
parameter, or press
Select to change
12.
When you have finished the
review, press Next to continue
Setting up the Pump for a New Patient
