Issue 002 - April 2020 | SmithsEP.co.uk | 7
www.sonniger.com
7
Technical manual Ostro air curtain v201709
Installation using
brackets for vertical mounting
It is also possible to install the unit vertically
.
Two vertical mounts are used for this purpose. In the brackets there are Ø9mm holes
for M8 screws. In the EPP housing, drill holes Ø12-13mm in front of existing holes in the steel intake grille. The exact location is
indicated by
special tags on the EPP housing and the figure below. Then insert the spacer sleeves into the holes and fix the
brackets. Screw the remaining screws into the nuts under the steel intake grille so that both grips are in one plane. Locknuts under
the handles are used to secure the screws from unscrewing.
Curtain size
C(mm)
100
857
150
1295
200
1712
