Smiths detection HI-SCAN 100100T, User Manual

Page: 42 / 222

How to start and terminate your work

Keep the ON/OFF key of the UPS unit depressed until
the unit switches on (see enclosed User's guide of the
UPS unit).

Close the cover again.

After having carried out the checks mentioned in para-
graph “How to ensure safety” (
F
1-3) insert the appro-
priate key into the key switch on the keyboard of the
HI-SCAN X-ray unit and turn it to the right to position II
as you do when starting a vehicle. As soon as you hear
the X-ray unit switching on, release the key to position
I .

Switch on the monitors if they have not been switched
on together with the unit.

On the keyboard of the HI-SCAN X-ray unit the power-
on indicator
K
and, after a short delay, the wait indic-
ator
L
light up. The HI-SCAN X-ray unit is carrying
out a self-test first.

After a short moment, the display illustrated appears. In the upper screen area, a test image appears, in
the lower screen area, the indication field (
F
1-23) is displayed. In dual view units a second test image
appears on the second screen with a second indication field (
F
1-27).
95587412 01/01/09 © Smiths Heimann
I
The UPS unit can be switched off in the same
way if the X-ray unit has to be disconnected
from the mains for a longer period of time.
1-32
I
In units equipped with power fail buffer *
you have to wait about 3 seconds after
the end of a power failure before you can
switch on again.
If you have
just turned off the unit also
wait at least 3 seconds before turning on
again.
I
In case of emergency, you can always
switch off conveyors and X-ray generat-
ors of the X-ray unit or the complete unit
by actuating one of the
emergency stop
buttons (for the restart see next para-
graph).