Smiths detection HI-SCAN 100100T User Manual Download Page 127

Page: 127 / 222

How to use the ZIP*, RIDA* and CD/DVD* drive and the USB interface*



If no drive was plugged in yet, loosen the two illus-
trated screws and remove the lid to the right.



If a drive or an empty plug-in unit already exists, move
the illustrated lever to the right and pull out the drive
or the empty plug-in unit.



Move in the new drive until the release trigger locks.



Switch on the X-ray unit afterwards.

Peculiarities of older RIDA removable drives*



Insert the appropriate key into the lock on the right
side of the drive and slightly press it in, then turn it to
the right into a vertical position.



You can now withdraw the hard disk with its handle
and insert the new one.



Finally, press in the key slightly again and turn it to the
left into the horizontal position. Withdraw the key.

95587413 01/01/09 © Smiths Heimann

After switching on, the indicator of the drives
lights up shortly. This indicates that the drive
has been installed correctly.

2-5

Summary of Contents for HI-SCAN 100100T































































































































































































































Search results

Summary of Contents for HI-SCAN 100100T

Reviews:

Related manuals for HI-SCAN 100100T

Brands by name

Popular brands

Smiths detection HI-SCAN 100100T, User Manual

Search results

Summary of Contents for HI-SCAN 100100T

Reviews:

Related manuals for HI-SCAN 100100T

Brands by name

Popular brands