Left Cable
Relief Clip
Pack Frame
Shoulder Strap
Adjustment
Shoulder Strap
Chest Strap
Quick Release
Waist Belt
Quick Release
Right Cable
Relief Clip
Padded Waist Belt
*WARNING:
Always unfasten the chest strap of the pack before crossing or entering the water. Should
you fall into deep water, the chest strap may prevent you from removing the electrofisher quickly.
CABLE STRAIN RELIEF CLIPS
These clips are designed to prevent the anode and cathode
cables from traveling beyond their recommended range of
motion and to relieve undue strain on the connector plugs.
Make sure that the ring-mounted swivel clip on either side of
the packframe is attached to the electrode cables as shown
in Fig. 1. Using the rings and clips in the manner indicated will
transfer the weight of the electrode cables to the packframe
and offset the possibility of damaging either cable or their
respective connectors.
WARNING:
Without Cable Strain Relief Clips, the anode and cathode connectors
or their cords could become damaged.
Fig. 1
PACKFRAME
The packframe allows for various positions of the shoulder straps and waist belt to fit most people.
The straps and belt all have quick release latches that allow the Electrofisher to be removed quickly
if the operator falls into deep water or becomes injured*. For more information regarding emergency
quick release procedure, see
Quick Release System
on page 22.
USER’S GUIDE
7
2018