ON/OFF SWITCH:
Located on top
of the electrofisher enclosure. To
turn the power on, the user must
rotate the switch 90 degrees
in the direction of the arrows
(clockwise). To turn the unit off,
press down on the button.
ANODE CONNECTOR:
Located
on the bottom right corner of
the electrofisher the large black
2 socket connector provides the
high voltage connection for the
anode electrode. This connector
has a locating lug that assures
the anode pole can only be
connected one way. The proper
connection for the anode pole
is with the cable pointing away
from the backpack.
BATTERY POWER CONNECTOR:
Located on the bottom left center
of the electrofisher this red and
black color coded connector
provides power to the unit from
the battery*. To connect a
battery to the electrofisher,
match the colors on the battery
connector to the colors on the
battery's connector, red to red
and black to black**.
CATHODE CONNECTOR:
Located on the bottom left
corner of the electrofisher the
large black 2-socket connector
provides the high voltage
connection to the cathode
electrode. This connector has
a locating lug that assures
the cathode can only be
connected one way. The proper
connection for the cathode is
with the cable pointing away
from the backpack.
CONTROL CONNECTOR:
Located on the bottom right
center of the electrofisher the
small black 4-socket connector
provides the low voltage
control connection to the pole
switch. This connector has
a locating lug that assures
that the control connector
*CAUTION:
Before con-
necting or disconnecting
a battery to the unit, make
sure the power switch is in the off
position, failure to do so may cause
damage to the battery and the elec-
trofisher.
EXTERNAL CONTROLS,
CONNECTORS AND SENSORS
can only be connected one
way. The proper connection
for the control connector
is with the cable pointing
away from the backpack.
IMMERSION SENSOR:
Located
on the bottom left corner
of the enclosure behind the
cathode connector. The
output of the electrofisher
is automatically deactivated
when these contacts come
in contact with water.
NOTE:
Although the
immersion sensor is located
above the battery tray of
the LR-20, do not submerge
the battery; doing so will
cause damage to the battery
and the electrofisher.
NOTE:
The front cover must
be closed and latched before
the output of the unit can be
activated.
**WARNING:
Reversing the
connectors will damage the
electrofisher and may cause
serious injury or death.
CONTROLS & CONNECTORS
LR-20 SERIES BACKPACK ELECTROFISHER
4
www.smith-root.com