Electrofishing equipment uses voltages and currents that can be lethal to humans. The
operators must always keep in mind that the chance of receiving an electrical shock is multiplied
in or near water. If used properly and with good judgment, an electrofisher is perfectly safe; lose
respect for it and you can lose your life!
Electrical equipment used in a moist field environment is always subject to deterioration that
could lead to dangerous electrical shock. Field equipment is also subjected to vibration and
impact during transporting and while in operation. Often equipment shared by different crews
does not receive proper maintenance or a complete checkout.
Follow the safety guidelines and use good common sense to handle unforeseen circumstances.
PROPER EQUIPMENT
To prevent electrical shock, all electrical equipment should be carefully inspected before each
field operation. With all electrical equipment in good operating condition and all insulation
junction boxes, bonding, and connections intact, there is much less danger of receiving an
electrical shock.
MAKE SURE THAT:
• Electrofisher gives audible sound when voltage is present at anode.
• Quick release system is functioning properly.
• Tilt switch is functioning properly (turns power off).
• Dipnets with non-conductive handles are used in conjunction with properly rated (
≥
1,000V)
lineman gloves.
• Electrodes are free from corrosion (clean if necessary), Anode does not have netting attached
to ring, Make sure cathode is free of wear and burrs and its cable insulation is undamaged.
• Poles are free of cracks in fiberglass handle.
• Power Supply- check all batteries for damage / leakage (disconnect power supply before
transporting and when not in use).
• Always purchase electrofishing equipment from an authorized dealer.
ELECTROFISHING SAFETY
SAFETY
LR-20 SERIES BACKPACK ELECTROFISHER
18
www.smith-root.com