10. Duty cycle and frequency
can have a huge impact
on taxis. Do not be timid
about changing these set-
tings. In general, lower
frequencies are safer for
larger fish than higher fre-
quencies. If you are not
getting any response from
fish at all, then change the
settings as follows:
a. Increase the voltage
switch one position, and
try again. Stop increas-
ing voltage when you
begin getting a forced
response (twitch) from
the fish when you press
the anode pole switch.
b. If fish are not showing
taxis, then increase the
duty cycle switch one
position, and try again.
If necessary, repeat
this step until you elicit
taxis in the fish. If you
increase the duty cycle
to maximum and still
are not getting taxis,
then reduce the duty
cycle back to 10% and
go to the next step.
c. Increase the frequency
switch one position,
and try again. If neces-
sary, go back to step
“a” before increasing
frequency again.
OFF
ON
Electrode Pole Safety Switch
Front Panel details
OPERATION
USER’S GUIDE
9
2018