10
11
smithandnoble.com
800.248.8888
CR2450
LITHIUM B
ATTER
Y
3V
P2
M
P2
CR2450
LITHIUM BATTERY
3V
P2
M
P2
CR2450
LITHIUM B
ATTER
Y
3V
P2
M
P2
CR2450
LITHIUM BATTERY
3V
P2
M
P2
BATTERY
INSET
BACK OF
REMOTE
BACK OF
REMOTE
ADJUSTING SPEED
REPLACE BATTERY IN REMOTE
Slide the back cover off the remote.
Remove the batt ery and replace it with a
new batt ery (CR2450). The new batt ery
should be inserted with the writi ng facing
up (positi ve side up).
Replace the back cover of the remote.
NOTE:
When installing the batt ery for
the fi rst ti me, you will need to remove the
fi lm packing sheet.
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
Adjusti ng the Speed
ACCELERATION:
Select the channel your motorized track
is on. Press P2 butt on on the back of the
remote unti l the motor beeps once.
Press the UP butt on unti l the motor
beeps once.
Press the UP butt on again unti l the
motor beeps once. The rod speed is now
accelerated.
HOW TO
SPEED UP THE
MOTOR
SCAN TO PLAY VIDEO
DECELERATION:
Select the channel your motorized track
is on. Press P2 butt on on the back of the
remote unti l the motor and beeps once.
Press the DOWN butt on unti l the motor
beeps once.
Press the DOWN butt on again unti l the
motor beeps once. The rod speed is now
decelerated.
HOW TO
SLOW DOWN THE
MOTOR
SCAN TO PLAY VIDEO
REMOVING THE REMOTE BACK COVER
For added safety, the remote has a locking
tab on the back cover to prevent accidental
removal.
To remove the back cover, press the tab down
gently using a small screwdriver. While the tab
is depressed, slide the cover down then lift the
cover up to remove from the remote.
If the back cover does not have a locking tab,
simply slide the cover down to unlock then lift
the cover up to remove from the remote.
COVER
SLIDES OFF
CR2450
LITHIUM B
ATTER
Y
3V
P2
M
P2
CR2450
LITHIUM BATTERY
3V
P2
M
P2
TAB
