4
5
smithandnoble.com
800.248.8888
SETTING MOTOR LIMITS
Open Limit
1. Press and hold UP and STOP buttons for
5 seconds. The motor will sound a long
beep.
2. Press the UP button to open the drapes.
3. If the drapes don't open all the way, push
the master carrier all the way to the end
to push the drapery all the way open.
4. Press the STOP button when the drapes
are at the desired position.
5. Press and hold the UP and STOP buttons
for 2 seconds. The motor will sound 3
beeps.
The new open limit is now set.
Close Limit
1. Press and hold DOWN and STOP buttons
for 5 seconds. The motor will sound a
long beep.
2. Press the DOWN button to close the
drapes.
3. If the drapes don't close all the way, push
both master carriers towards the middle
until the drapes are closed all the way.
4. Press the STOP button when the drapes
are at the desired position.
5. Press and hold the DOWN and STOP
buttons for 2 seconds. The motor will
sound 3 beeps.
The new close limit is now set.
NOTE:
When setting new limits, your
previously programmed Favorite Position
will not be deleted.
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2
BUTTON
SETTING & USING A FAVORITE POSITION
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
If there is only a single rod on the channel proceed
to SETTING A FAVORITE POSITION below.
If there is more than one rod on the channel,
before setting a favorite position, all rods on
that channel will need to be unpaired from the
remote (see UNPAIR THE REMOTE). Next, pair
only the rod that needs a favorite position set
(see PAIR THE REMOTE). Then follow the steps
below to set a favorite position.
Setting a Favorite Position
Check both upper and lower limits are set.
Use the UP or DOWN buttons to position the
rod/drape at the desired “favorite” position.
Press P2 on the back of the remote until the
motor beeps.
Press the STOP button until the motor beeps
once then release.
Press the STOP button again and the motor will
sound 3 beeps. Your “favorite” position is now set.
Using a Favorite Position
Press the STOP/FAVORITE button for 2
seconds. The rod will automatically move to the
set “favorite” position.
Removing a Favorite Position
Press the P2 button on the back of the remote
until the motor beeps.
Press the STOP button until the motor beeps
then release.
Press the STOP button again and the motor will
sound a long beep. Your “favorite” position has
now been removed.
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
HOW TO
SET YOUR FAVORITE
POSITION
SCAN TO PLAY VIDEO
