8
9
smithandnoble.com
800.248.8888
RESETTING TO FACTORY MODE
Reset to Factory Mode:
Press and hold SETTING butt on on the
motor for 14 seconds and the motor light
will light up 3 ti mes.
Release butt on and the motor beeps 3
ti mes. The motor has been reset to factory
mode. All setti ngs have been cleared.
NOTE:
Once in factory mode, the motor will
go to sleep. The motor must be taken out
of sleep mode to operate and reset limits.
Press the SETTING butt on on the motor for
2 seconds to wake up. Once the motor
is out of sleep mode, it can be paired to
controller and limits can be set.
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
SWITCHING DIRECTION
Switching Directi on (Polarity)
If the drape opens when pressing the
DOWN butt on and closes when pressing
the UP butt on, the directi on needs to be
switched.
Select the channel your motorized track is
on. Press and hold the setti ngs butt on unti l
the green light on motor lights up three
ti mes, approximately 10 seconds. Release
the butt on and the motor will beep three
ti mes. Press the DOWN butt on and motor
will beep 3 ti mes. The directi on has been
switched successfully.
HOW TO
SWITCH
DIRECTION
SCAN TO PLAY VIDEO
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
BOTTOM OF BATTERY
SETTINGS
MOTOR
