15
16
smithandnoble.com
800.248.8888
Step 3 — Hanging the Shade
Hanging the Shade
Once the brackets are secured and
level, the fabric roll can be inserted.
Make sure your hands are clean to
avoid soiling the fabric .
Insert the foot of the control side
bracket into the slotted center hole of
the clutch . Set nub of the end plug into
the V of the support bracket . Rotate
the T-hook on the support bracket to
engage over the nub on the idler and
secure the fabric roll .
Nub
Support
Bracket
T-Hook
Step 4 — Attaching the Power Source
Attaching the Power Source
Plug the battery pack wire into the
motor wire .
Noting the length of the wire, determine
the best location for the battery pack .
The pack may be mounted to the
window casing, the wall or behind the
fabric roll (if space permits) . Before
mounting the pack make sure that the
pack and excess wire will not interfere
with the operation of the shade .
Extension wires are available if needed .
Attach Battery Pack Clips
Wall mount - attach the pack clips
with the screws provided. If necessary,
remove shade to mount the clips in the
desired location .
Press the pack into the Clips
Wall mount -
attach the wand
clips with the
screws provided. If
necessary, remove
shade to mount the
clips in the desired
location.
UltraSleek Plus
Deluxe
Attaching the Transformer
Plug the transformer wire into the motor
wire . Secure the wire behind the shade
and along the window casing as required.
Plug the transformer into an electrical outlet .
If the wire is not long enough to reach,
optional 48” extension wires are available.
To Solar Panel
To Motor
