7
8
smithandnoble.com
800.248.8888
Attaching the Power Source
When attaching the Power Source
to the Battery pack, first plug the
battery pack wire into the motor wire .
(see illustration to left)
Noting the length of the wire, determine
the best location for the battery pack . The
pack may be mounted to the window
casing, the wall or behind the fabric
roll (if space permits) . Before mounting
the pack make sure that the pack and
excess wire will not interfere with the
operation of the shade . Extension wires
are available if needed .
Battery Pack Clips -
Wall Mounting
Wall mount - attach the pack clips
with the screws provided. If necessary,
remove shade to mount the clips in the
desired location .
Press the pack into the Clips
Step 4 — Attaching the Power Source
Wall mount -
attach the wand
clips with the
screws provided. If
necessary, remove
shade to mount the
clips in the desired
location.
UltraSleek Plus
Deluxe
Battery Pack
Battery Wire
Motor Wire
Attach and twist
clockwise until tight
(do not overtighten)
Attaching the Transformer
Plug the transformer wire into the
motor wire . Secure the wire behind
the shade and along the window
casing as required.
Plug the transformer into an electrical outlet .
If the wire is not long enough to
reach, optional 48” extension wires
are available .
Step 4 — Attaching the Power Source
To Solar Panel
To Motor
