33
34
smithandnoble.com
800.248.8888
HANG STRIP - INSTALLING HANG STRIPS
HANG STRIP - INSTALLING HANG STRIPS
Installing the Right Hang Strip
(cont)
With hang strip properly positioned
in the opening, insert screw in top
pre-drilled holes and secure right
frame to the jam. Make sure the
hinge barrel is in position correctly
before securing screw. REPEAT for
bottom pre-drilled hole (refer to tip
above for flush panel installation).
Complete frame installation by
securing the frame with screws into
the remaining pre-drilled holes.
Installing the Panels
With both hang strips installed,
place the left shutter panel into
the window opening and slide into
position. Once panel is aligned with
frame hinge, insert hinge pins into all
hinges to secure the panel.
Installing the Left Hang Strip
(Cont)
With hang strip properly positioned
in the opening, insert screw in top
pre-drilled holes and secure left
frame to the jam. Make sure the
hinge barrel is position correctly
before securing screw. REPEAT for
bottom pre-drilled hole
(refer to tip
above for flush panel installation).
Complete frame installation by
securing the frame with screws into
the remaining pre-drilled holes.
Installing the Right Hang Strip
(Cont)
Place right hanging strip along the
inside right jam of the window.
Tip: For flush panel installation, line the backside
of hinge barrel with the wall surface.
Once top screw is
tightened, line up
the bottom hinge in
reference to top hinge
position.
Once top screw is
tightened, line up
the bottom hinge in
reference to top hinge
position.
With hinge aligned,
secure the top screw.
With hinge aligned,
secure the top screw.
With hinge lined up,
secure the bottom srew
into the pre-drilled hole.
With hinge lined up,
secure the bottom screw
into the pre-drilled hole.
Position right Hang
Strip
