5
Photo 1
Dome
Step 2:
Remove the existing dome assembly from
the motor adapter.
Step 1:
Turn off and lockout power to the unit.
Mounting Hardware
Compression Ring
Step 3:
Now apply plumbers grease, petroleum
jelly or non pumice hand soap to the o-ring
at the bottom of the dome assembly
(Item
1)
. This will make it easy to install the
dome into the motor adapter or adapter
ring. Now install the dome into the motor
adapter or adapter ring.
NOTE:
Motor
adapter ring shown
(see
Photo 2)
.
Photo 2
1
Step 4:
Position the retainer compression ring of
the dome assembly
(Item 1)
so that the
holes line up with the studs
(Item 2 or
existing)
. Install the washers
(Item 3
) and
nuts
(Item 4)
to secure the retaining ring
(See Photo 3)
.
Photo 3
1
2
3
4
Compression Ring
