14
Photo 37
Diagram 5 - Option 2 - After
Connect the red wire of the DIN connector
cable
(Item 9)
to the other tab of the delay
timer
(Item 14)
with the other female
disconnect
(Item 16) (see Photo 34)
.
Secure the wire by crimping the female
disconnect
(Item 16)
.
Connect the black wire of the DIN
connector cable
(Item 9)
to neutral
(see
Photo 35)
and connect the white wire to
ground
(see Photo 36)
.
Diagram 5
shows a typical updated wiring
schematic with the delay timer
(Item 14)
added.
Remove the old solenoid valve completely.
It is recommended that the hole be
plugged to protect the control panel (plug
not provided). Make sure any loose wires
have a wire nut installed to the end and
that all neutral and ground wires are still
tied together properly.
Go to step 11.
Photo 34
16
14
Photo 36
Photo 35
9
9
9
