Installation
59
EN
Hob seal
To prevent leakage of liquid between the
frame of the hob and the countertop, place
the adhesive seal provided along the entire
outer edge of the hob before assembly.
Mounting dimensions (models with
straight edge)
For this kind of hobs additional milling is
needed in the recessed hole if you wish to
install the hob flush with the work surface.
After laying the adhesive seal (
A
) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (
B
) and wipe away any
excess.
In the event the hob needs to be removed,
cut the silicone using a cutter before
attempting to remove it (
C
).
Do not use silicone to secure the
hob. This would make it impossible
to remove the hob, if necessary,
without damaging it.
L
X
Y
G
H
600 -
750
560
478÷
490
604
514
A
B
C
D
E
min.
50
min.
460
min.
750
20 - 60
min.
50
