background image

Use

47

EN

Advice on energy-saving

•  The diameter of the base of the pan must 

not exceed the width of the silk-screened 
cooking zone.

•  Pans must not be placed outside the 

perimeter of the hob or above the front 
control panel.

•  When buying a pan, check whether the 

diameter indicated is that of the base or 
the top of the pan, as the top is almost 
always larger than the base.

•  When preparing dishes with long 

cooking times, you can save time and 
energy by using a pressure cooker, 
which also helps to retain vitamins 
contained in the food.

•  Make sure that the pressure cooker 

contains enough liquid as, if there is not 
enough and it overheats, this may cause 
damage to both the pressure cooker and 
the cooking zone.

•  If possible, always cover pans with a 

suitable lid.

•  Choose a pan suitable for the quantity of 

food to be cooked. A large, half-empty 
saucepan leads to a waste of energy.

Power levels

The power in the cooking zone can be 
adjusted to various levels. The table shows 
the levels suitable for various types of 
cooking.

* see Booster function

Switching the hob on and off

Keep the On/Off button 

 pressed in 

for at least 1 second to activate the hob. 
Press it again for at least one second to 
deactivate it.

Under certain circumstances, if the 
hob and the oven are being used 
at the same time, the maximum 
power limit that can be used by the 
electrical system might be 
exceeded.

Power level

Suitable for:

0

OFF setting

1 - 2

Cooking small amounts of food 

(minimum power)

3 - 4

Cooking

5 - 6

Cooking large quantities of food, 

roasting larger portions

7 - 8

Roasting, slow frying with flour

9

Roasting

P

Roasting / Browning, cooking 

(maximum power)*

If no power setting is selected 
within 20 seconds, the hob is 
automatically deactivated.

Summary of Contents for SI4642B































Reviews: