Use
52
Warming Function
To activate the Warming function, first turn
on the hob, then:
1. Select a cooking zone.
2. Press the far left of the scroll bar,
approximately between level 0 and level
1, to activate the function; the
symbol appears on the display of the
selected cooking zone.
Select any power level to deactivate the
Warming function.
Or press the
button.
Timer
After having switched on the hob, without
having selected a cooking zone:
1. Touch the inside of the timer setting area.
2.
appears on the display.
3. Pressing again will cause the digit on the
left to flash. It is now possible to set the
minutes using the scroll bar (e.g.
).
4. When the digit on the left stops flashing,
the tens of minutes (e.g.
) can be
selected using the same procedure.
5. After a few seconds, the timer will start
the countdown.
6. When the time elapses, a series of beeps
will be emitted. This can be deactivated
by pressing the timer area.
Timed cooking
The timed cooking function can be
activated when at least one cooking zone
is switched on:
1. Select a power level.
This function allows you to keep
cooked food warm or to keep
water on the boil.
For safety reasons, the Warming
function remains active for a
maximum of 2 hours.
This function is used to set a timer
that will emit a sound at the end of
the pre-set time.
A maximum of 99 minutes can be
set.
Using the minute minder does not
stop the operation of the cooking
zones but rather informs the user
when the set minutes have run out.
This function is used to program the
automatic switch-off of each
cooking zone at the end of a
period of time.
A maximum of 99 minutes can be
set.
