Rev.
00
GW2045 – GW1060 Manual
Pag. 29 di 43
6.13. COMMUNICATION
WITH
PRINTER
A serial port (RS232) is available as a standard feature on the appliance, to which the SMEG printer, named
“WD-PRINTE” with code 901783, may be connected.
Once of the accessories supplied is a flat extension to connect RS232 in a more accessible position.
The printer is capable of printing out the following data:
•
Serial Number of the WD1050
"Serial Number"
•
Number of cycles carried out
"Cycle N."
•
Date and Time
•
Program Number indicating Thermal Disinfection Temperature and holding time (for example 93°C
10’)
•
Detergent control
o
"Inflow Detergents P1 Deter
" - for the detergent;
o
"
Inflow Detergents P2 Neutr"
- for the neutralizing agent;
•
Temperature control
o
‘
TL1
’: indicates the temperature measured inside the washing chamber. It is the main
temperature of the cycle;
o
‘
TLC
’: Indicates the control temperature (on hospital models, not on laboratory models).
o
‘
Target T
’: stands for the target temperature value of the phase
•
Heating element
o
‘
Res ON
’: indicates that the heating element is on;
o
‘
Res OFF
’: indicates that the heating element is off;
•
Starting Time of the Cycle
•
Process of each Phase
•
End of Cycle time
•
Eventual errors if Cycle terminates incorrectly.
•
‘
A
0
’: stands for the thermal disinfection effectiveness; It measures the effectiveness of the thermal
disinfection process carried out..
GW2045 – POSITION OF PORT RS232
fig. 8 - Rear of GW2045, detail of RS232 connection, where it is possible to connect the external printer. Position Rear cross section, left side.
