Instructions for the user
76
10.2.2
Barbecue drip tray
To remove the drip tray under the
barbecue heating element:
1.
Remove the griddle as described
in point 10.2.1;
2.
Raise the heating element and fix
it in place by sliding the retainer to
the right (as shown in the adjacent
diagram);
3.
Remove the drip tray using the
two handles and clean using
specific detergents for stainless
steel and a non-abrasive sponge.
10.2.3
Pan stands
Remove the right-hand pan stands (g fish burner) as shown in the
diagram. There is no special order for removal of the left-hand pan
stands. Clean the pan stands in warm water and non-abrasive detergent,
taking care to remove all incrustations. Replace, fitting first the outside
pan stand then the griddle.
10.2.4
Burner caps, flame-spreader crowns and burners
The burner caps, flame-spreader crowns and burners
can be removed for easier cleaning. Remove the pan
stands and wash them in warm water with a non-
abrasive detergent, taking care to remove all
encrustations, and wait until they are
completely
dry
. Reassemble the burner caps on their crowns,
ensuring that niches
A
are centred with burner pins
B
.
10.2.5
Ignition plugs and thermocouples
For best performance, the ignition plugs and thermocouples
must always be kept thoroughly clean. Check them
frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a
needle.