QuickServer Start-Up Guide
Page 62 of 71
Appendix C.5. Change User Management Settings
•
From the FS-GUI page, click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
NOTE: If the passwords are lost, the unit can be reset to factory settings to reinstate the default
unique password on the label. For QuickServer FS-QS-1xxx, ProtoNode, ProtoCessor or
ProtoCarrier recovery instructions, see the
FieldServer Recovery Instructions document
.
For QuickServer 2xx0, ProtoNode FPC-N54 or ProtoAir recovery instructions, see the
FieldServer Next Gen Recovery document
. If the default unique password is lost, then the
unit must be mailed back to the factory.
NOTE: Any changes will require a FieldServer reboot to take effect.
Appendix C.5.1. User Management
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify any settings on the FieldServer.
Operator
– Can modify and view any data in the FieldServer array(s).
Viewer
– Can only view settings/readings on the FieldServer.
Figure 37: FS-GUI User Management
