QuickServer Start-Up Guide
Page 22 of 71
6.3 Connecting to the QuickServer
6.3.1 Using the FieldServer Toolbox to Discover and Connect to the QuickServer
•
Install the Toolbox application from the USB drive or download it from the
Sierra Monitor website
.
•
Use the FS Toolbox application to find the QuickServer and launch the FS-GUI.
NOTE:
If the connect button is greyed out, the QuickServer’s IP Address must be set to be on the
same network as the PC. (Section
8.1
)
6.3.2 Using a Web Browser to Connect to the QuickServer
•
Open a web browser and connect to the QuickServer
’s default IP Address. The default IP
Address of the FieldServer is
192.168.2.101
, Subnet Mask is
255.255.255.0
.
•
If the PC and the QuickServer are on different IP networks, assign a static IP Address to the PC
on the 192.168.2.X network.
