-8-
No. TQ1230001-OM106-B
3. Specifications
3.1. Specifications
■
Product specifications
Common
Standards
Conforming to ISO 9409-1-31.5-4-M5
Applicable fluid
Air
Operating temperature range [°C]
5 to 50
Weight [g]
ZXP7N-X1
-KA
427
ZXP7A-X1
-KA
659
Example)
ZXP7A-ZPB25JS-X1-KA
712 note1)
Max. work load [kg] Note2)
7
Impact / Vibration resistance [m/s
2
] Note3)
150 / 30
Air supply port (P)
One-touch fitting (Φ4) Side
Release pressure supply port (PD)
One-touch fitting (Φ4) Internal
Vacuum
ejector
Max. vacuum pressure [kPa] note4)
-84
Suction flow rate [L/min(ANR)] note4)
17
Air consumption [L/min(ANR)] note4)
57
Supply pressure range [MPa]
0.3 to 0.55
Standard supply pressure [MPa] note5)
0.5
Pressure
switch
Model
ZSE20-
-
-M5-LA2
Power supply voltage
[V]
12 to 24 VDC ±10%
Ripple (p-p) 10% or less
Rated pressure range [kPa]
0 to -101
Display accuracy [%]
±
2 F.S. ±1 digit
(Ambient temperature at 25°C
±3
°C)
Repeatability [%]
±
0.2 F.S. ±1 digit
Temperature characteristics [%]
±
2 F.S. (Standard on 25
°C)
Applicable suction cups
Refer to “3.4. How to order”
Standard
CE/UKCA MARKED
Note 1) The weight changes by the selected suction cup. Refer to “3.4 How to order”.
Note 2) May be restricted depending on the cup diameter, mounting orientation, or workpiece. Please use within the max. work
load. Suction and transfer exceeding the max. work load may result in reduced vacuum pressure due to air leakage
.
Note 3) Impact resistance: The characteristics are satisfied after tested one time in each of the X, Y and Z directions without
energization. (Initial value)
Vibration resistance: The characteristics are satisfied after tested a one sweep in each of the X, Y and Z directions at 10
to 500 Hz without energization. (Initial value)
Note 4) Values are at the standard supply pressure and based on SMC’s measurement standards.
They depend on atmospheric pressure (weather, altitude, etc.) and the measurement method.
Note 5) This value indicates the pressure right before the air pressure supply pressure (P) port when vacuum is generated.
The pressure right before the P port of the vacuum gripper when vacuum is generated may fall below 0.5 MPa due
to the air supply capacity, piping size, and the amount of air being consumed by other devices being operated
simultaneously.
