-21-
No. TQ1230001-OM106-B
Plug (M-3P)
(2 pcs.)
Tighten by hand, and give it an
additional turn approx. 1/4
rotations with a wrench.
(2) Mounting of the plug
6.3 Change to 2 cups
1. Disassemble the suction cups with adapter
(1) Remove the suction cup with adapter from the plate B using a spanner.
(2) Loosen the bolt (M4 x 8), then remove plate B from plate A.
Be careful not to lose the O-ring.
2. Mounting of the plug
Confirm the gasket seal in the plug, then mount the plugs to plate A.
Reassemble the parts by reversing the disassembling process with specified tightening torque.
Caution
T
ightening torque: 1N
・
m, (As reference, tighten by 45 degrees using a spanner after tightening by hand))
If tightened excessively, thread portion may be damaged and gasket may be deformed. This will cause air
leakage. Insufficient tightening may loosen the thread or cause air leakage.
Completion drawing
Plate A
Plate B (with O-ring)
Hexagon socket button bolt
(M4x8)
Tightening torque 1.5±0.15N
･
m
Suction cup with adapter
(1) Disassemble the suction cups with adapter
