6-3.Assembly Procedure
Step 1
Step 2
Assemble parts eliminating any dust or debris.
Wipe off dust with a Clean cloth soaked with
Ethanol. Blow parts with clean air if necessary.
(Ensure there is no fibers or dust. )
Eliminate any dust within O-ring groove of the
Valve.
Step 3
Step 4
Wipe off any dust on the valve seal O-ring
surface. Place the O-ring on the O-ring groove.
Press the O-ring into the groove in numerical
order (press diagonally) to fit the O-ring into the
groove. Take care not to twist the O-ring.
(Use dust-free gloves.)
Wipe off any dust from the external O-ring seal
and the mounting surface of the Body.
Place the O-ring on the O-ring mounting
surface.
Ethanol
Clean cloth
O-ring groove
Valve
O-ring
O-ring
Installation surface
of the O-ring
Body
3
4
2
1
13 -
XL*****-OMJ0005-C