![background image](http://html1.mh-extra.com/html/smc-networks/xlh16/xlh16_operation-manual_1299496013.webp)
6-2. Disassembly procedure
Step 1
Step 2
The heater is removed by loosening Bolt a.
Bolt a is behind the Cover. Remove the Cover
using a watchmaker's screwdriver.
Loosen the Bolt b gradually with the valve
opened a little in numerical order.
Remove the O-ring from the groove for
discharging gas using a plastic tool to prevent
scratch the O-ring groove. (Take care not to
scratch the O-ring groove. )
Step 3
Remove the outer seal O-ring from the Body
(Take care to prevent the mounting surface of O-ring from being damaged )
O-ring
Handle
assembly
Bolt b
Bolt a
Heater
Cover
Body
1
2
3
4
Bottom surface
of groove to
discharge gas
O-ring
Installation surface of the O-ring
Body
12 -
XL*****-OMJ0005-C