SY3000*-OMJ0003-A
-23-
How to Increase Manifold Bases
Station expansion is possible at any position.
□
1
Loosen bolt ○
a
fixing the manifold base until it begins to turn
idly. (While pressing DIN rail releasing buttons, at two
locations, separate the manifold base from the DIN rail.)
□
2
Press manifold block assembly dividing button ○
b
, that are
at the location where manifold bases are to be added, until
button○
b
locks, and then separate the block assemblies.
□
3
Mount additional manifold block assembly on the DIN rail as
shown in the figure 1.
□
4
Press the block assemblies until a click sound is produced,
and tighten the bolts ○
a
to fix them to the DIN rail.
(Tightening torque: 1.4 N.m)
(While lightly holding the blocks after fixing an end block on one
side, tighten the other end block for better sealing.)
Caution
Caution
Note 1) When there are 10 or fewer manifold block assemblies, and
more are added to make a total of 11 or more, a supply/
exhaust block assembly must also be added.
Note 2) When disassembly and assembly are performed air leakage
may result if connections between blocks and tightening of the
end block’s holding screw, is inadequate. Before supplying air,
confirm that there are no gaps, etc. between blocks, and that
manifold blocks are securely fastened to the DIN rail. Then
supply air and confirm that there is no air leakage before
operating.
How to Change Fitting Assembly
Fitting assembly part numbers
Metric size
One-touch fitting for
φ
4
VVQ1000-50A-C4
SY3000
One-touch fitting for
φ
6
VVQ1000-50A-C6
One-touch fitting for
φ
4
VVQ1000-51A-C4
One-touch fitting for
φ
6
VVQ1000-51A-C6
SY5000
One-touch fitting for
φ
8
VVQ1000-51A-C8
Inch size
One-touch fitting for
φ
5/32” VVQ1000-50A-N3
SY3000
One-touch fitting for
φ
1/4”
VVQ1000-50A-N7
One-touch fitting for
φ
5/32” VVQ1000-51A-N3
One-touch fitting for
φ
1/4”
VVQ1000-51A-N7
SY5000
One-touch fitting for
φ
5/16” VVQ1000-51A-N9
Note 1)P and R ports cannot be changed.
Note 2)Use caution that O-rings must be free from scratches
and dust. Otherwise, air leakage may result.
SY
SY
SY
SY
Series
Series
Series
Series
SY
SY
SY
SY3000
3000
3000
3000・
・
・
・5000
5000
5000
5000・
・
・
・7000
7000
7000
7000 Series
Series
Series
Series
Specific Product Precautions 16
Be sure to read before handing.
DIN Rail Manifold Exploded View
Summary of Contents for SY 5000 Series: SY7000 Series
