![background image](http://html1.mh-extra.com/html/smc-networks/smc8024l2/smc8024l2_management-manual_1300385044.webp)
C
ONFIGURING
THE
S
WITCH
36
If the network has adequate performance and security for your current
needs, it is recommended that you leave the VLAN settings in the default
configuration. The default configuration is as follows:
• All ports are members of VLAN 1
• The switch management interface is on VLAN 1 (this cannot be
changed)
• All ports have a Port VLAN ID (PVID) of 1
• All ports can send and receive both VLAN-tagged and untagged packets
(i.e. they are hybrid ports)
In the default configuration, any port is able to send traffic to any other
port and a PC connected to any port will be able ro reach the management
interface. Broadcast traffic, for example, will be flooded to all ports on the
switch.
There are three different parameters that can be configured for each port
on the switch; VLAN IDs (VLAN membership), PVID and Packet Type.
Note that the ports within a Trunk cannot be configured individually;
configure the Trunk instead (Trunks are labelled T1 to T8).
Field Attributes
• Port/Trunk
– The front-panel port-number of the port or the ID of a
trunk. This cannot be changed.
• VLAN Awareness
– VLAN aware ports will strip the VLAN tag from
received frames and insert the tag in transmitted frames (except PVID).
VLAN unaware ports will not strip the tag from received frames or insert
the tag in transmitted frames.
For QinQ application, customer port should be VLAN unaware and
network port (trunk port) should be VLAN aware.
• QinQ
– QinQ enabled port will accept packets up to 1526 bytes in
length, which means double tag header frames can be accepted.
For QinQ application, the QinQ should be enabled for provider port but
not for customer port.
Note:
For QinQ application, customer ports indicate those ports which