SMC Networks SMC7904WBRAS-N2 V2 - QUICK, User Manual

Page: 43 / 156

C
HAPTER
3
| System Configuration
Setup Wizard
– 43 –
S
TEP
4 - W
IRELESS
S
ETTINGS
The fourth page of the wizard configures wireless settings for the ADSL
router.
Figure 10: Wizard Step 4 - Wireless Settings
The following items are displayed on the first page of the Wizard:
◆
WLAN Interface — Enables/disables the wireless 802.11b/g/n
interface.
◆
Band — Selects the operating band and mode. The router supports the
2.4 GHz band and can operate in any combination of 802.11b, g, or n
modes.
◆
SSID — Specifies an SSID (service set identifier) which must be the
same as that on all wireless clients that wish to associate with the unit.
◆
Encryption — Specifies the security used to protect your wireless
network. (Default: None)
■
None: Allows any wireless client within range to associate with the
ADSL/Router.
■
WEP: Provides a basic level of security using static shared keys that
are distributed to all clients. Be sure to configure at least one static
key. Alternatively, enable 802.1X authentication to dynamically
create and distribute keys from a RADIUS server.
■
WPA(TKIP/AES): Wi-Fi Protected Access (WPA) using either a
static pre-shared key, or 802.1X authentication through a RADIUS
server. The encryption used is either TKIP or AES.