SMC Networks SMC7904WBRAS-N2 V2 - QUICK, User Manual

Page: 39 / 156

C
HAPTER
3
| System Configuration
Using the Web Interface
– 39 –
FTP ALG
Configuration
Configures FTP server and client ports 102
NAT IP Mapping Configures IP address mapping for NAT 102
IP QoS Configures IP-based QoS settings 103
MAC Filtering Configures MAC address filtering 105
DMZ Configures DMZ settings 106
URL Block Sets URL key words to block 107
Software Forbidden Blocks Internet access for specific software 108
DoS Setting Configures denial-of-service settings 109
IGMP Proxy Configures IGMP Proxy settings for multicast traffic 111
RIP Configures Routing Information Protocol settings 113
ARP Binding Configures Address Resolution Protocol binding 114
Advance
Bridge Setting Configures aging time and Spanning Tree settings 116
Log Setting Configures system log settings 117
Routing Configures static routing 118
UPnP Enables UPnP for the WAN interface 120
SNMP Configures SNMP settings 121
System Time Configures NTP time server settings 122
Others Configures Half Bridge settings 123
Port Mapping Maps LAN ports to WAN interfaces 124
Diagnostic
Diag-Test Runs diagnostic tests for the ADSL link 126
Ping Sends Ping echo requests to other devices 127
Ping6 Sends IPv6 Ping echo requests to other devices 127
Traceroute Checks routes to other devices 128
ADSL Runs ADSL diagnostic tone tests 130
Admin
Commit/Reboot Reboots the unit and/or restores factory defaults 133
Backup/Restore Backs up or restores configuration settings 134
Password Setup Changes the web access passwords 135
Upgrade Firmware Upgrades the unit’s software version 136
Configure TR-069 Configures parameters for establishing a connection
between the router and an auto-configuration server
137
Table 2: Configuration Menu (Continued)
Menu Description Page