![background image](http://html1.mh-extra.com/html/smc-networks/mxqr-6/mxqr-6_operation-manual_1299195017.webp)
17
4. Change of adjuster mounting position
4-1 Removal of accessories
(1) Mount the cap (enclosed with the product)
in the position shown in the figure on the
right to fix the table and guide block.
The position should be at “a” if using one
guide block, and “a” and “b” if using two
guide blocks.
Note) If the guide block comes off, it will be
difficult to reassemble the steel balls.
(2) Remove accessories (parts for adjuster and
stopper).
4-2 Removal of body
Turn the product over and remove the body fixing bolts. Then turn the body back over.
キャップ
アジャスタ用部品(前進端側)
ストッパ用部
品
アジャスタ用部品(後退端側)
Adjuster
parts
(for
retraction end)
Stopper parts
Cap
Adjuster
parts
(for
extension end)
Guide block
Table
steel balls.
Fixing bolt
s
Body
Guide
Turn-over
Fixing bolt
Fixing bolt
s
Body
Guide
Turn-over
Fixing bolt
b
a
Table
Guide block
Cap
Body
Enlarged sectional view of cap